Burngreave · S3
Casement glazing in Burngreave, Sheffield
We work on casement glazing across Sheffield, and Burngreave is one of the areas it comes up most. The opening light and the handle furniture project into the reveal, so clearance has to be designed in — which is why a room-side pane, rather than a replacement, is the answer here. Burngreave is not a conservation area, so the decision is purely technical rather than a consent question. Most enquiries here come from owner-occupiers doing one or two rooms at a time, so we price per opening rather than per house. We cover S3 continuously — Burngreave sits within reach of the Ring Road (A61), which is also the reason a lot of these calls are about noise.
Local conditions we design around
Where a top-hung vent is used daily we split the secondary into two panels so the vent stays reachable.
Handle and stay projection sets the minimum cavity, so we measure hardware rather than assuming a nominal gap.
Burngreave stock is high Victorian terraces and the prevailing glazing is tall one-over-one sashes, which is why casement glazing comes up here so often.
We record handle and stay projection at survey because that dimension, not the glass, sets the cavity depth.
Burngreave carries no conservation designation, so the specification is decided on performance alone.
Local reference points
- Area
- Burngreave (S3)
- Town
- Sheffield, South Yorkshire
- Housing era
- high Victorian terraces
- Typical windows
- tall one-over-one sashes
- Landmark
- Burngreave Cemetery
- Conservation area
- No
- Window style
- Casement Windows
- Period
- found across every period, dominant in interwar and post-war housing
From enquiry to install
- Step 1
Send a photo of the window — with side-hung opening lights on hinges we can usually tell you the likely system before we visit.
- Step 2
Survey in Burngreave: we record handle and stay projection at survey because that dimension, not the glass, sets the cavity depth.
- Step 3
Manufacture to the templated sizes with your chosen finish.
- Step 4
Room-side install with no external access and no alteration to the original frame.
The technical answer
| Window type | side-hung opening lights on hinges, often with a fixed pane and a top-hung vent (found across every period, dominant in interwar and post-war housing) |
|---|---|
| Underlying problem | the opening light and the handle furniture project into the reveal, so clearance has to be designed in |
| System we fit | hinged secondary units, or lift-outs where the original is rarely opened |
| Glass specification | 4 mm Low-E as standard, 6.4 mm laminated on road-facing elevations |
| Measurement | we record handle and stay projection at survey because that dimension, not the glass, sets the cavity depth |
| Heritage position | on interwar stock the casements are usually not protected, which widens the specification options |
Other window types in Burngreave
Every opening is templated on site — we do not price secondary glazing by the square metre.
Quotes are written, itemised per opening, and hold for 60 days.
Glass specification is decided after the survey, not before — the same room can need two different thicknesses.
Cavity depth does more for acoustic performance than glass thickness, and we design for it first.
Common questions
Will the secondary unit foul the casement handle?
Not if the cavity is set from the hardware projection, which is what we measure on survey. It is the most common cause of a badly-fitting retrofit elsewhere.
Hinged or lift-out for a casement?
Hinged if you open the window regularly, lift-out if you do not — lift-outs are slimmer and cheaper but need somewhere to store the panel.
Can you cover a fixed light and an opener together?
Yes, usually with a two-panel unit so the opener stays accessible and the fixed light is sealed.
Can we do one room now and the rest later?
Yes. We template and price per opening, so a later phase is quoted at the same rate — there is no penalty for splitting the work.
Will it get in the way of curtains or blinds?
Rarely. Reveal-fixed units sit inside the existing recess; where the recess is shallow we face-fix and reposition the blind, which we flag at survey rather than on the day.
Recent installs nearby
Nether Edge Grade II sash retrofit
Six original box sashes fitted with balanced vertical secondary sliders — full listed-building consent secured in six weeks.
Ecclesall Road bay-window sound retrofit
Three-panel horizontal sliders across a 3.2 m Edwardian bay — Rw measured at 47 dB post-install.
Kelham Island loft conversion
Four large steel-frame factory openings sealed with slim satin-anodised horizontal sliders. Post-install U-value 1.87 W/m²K.
Start with one room — Windows
Send the opening sizes for the worst room and we will price that first — extending later costs no more. Send a photo of the casement glazing — with side-hung opening lights on hinges in a high victorian terraces Burngreave property we can usually spec it before we visit.
Casement glazing in Burngreave — the short version
The opening light and the handle furniture project into the reveal, so clearance has to be designed in. We fit hinged secondary units, or lift-outs where the original is rarely opened with 4 mm Low-E as standard, 6.4 mm laminated on road-facing elevations, templated to your opening. A single hinged panel seals the whole opening including the fixed light, which is where most of the leakage actually is.