any
Secondary Glazing for Listed Buildings
If you own a listed buildings, the window problem is nearly always the same: no permitted route to modern glazing performance. Every listed-building owner runs into the same wall: the modern glazing performance you need isn't compatible with the historic fabric you're legally obliged to protect.
Why listed buildings owners choose secondary glazing
We produce free consent-ready drawings and specifications with every listed-building quote.
Vision HD and Vision Ultra slim profiles are the standard specification for Grade II* and Grade I properties.
Room-side secondary glazing is the only glazing upgrade that leaves the listed fabric completely untouched — it's why conservation officers usually prefer it.
Recommended: Heritage & Listed
the conservation officer's preferred upgrade
fully reversible install — no alteration to historic fabric
Historic England and most local conservation officers recommend room-side secondary glazing over replacement double glazing on protected properties — it's the only upgrade that's fully reversible.
Recent installs nearby
St John's Ranmoor stained-glass shield
Slim satin-anodised secondary lift-outs protecting original stained-glass panels from thermal shock.
Nether Edge Grade II sash retrofit
Six original box sashes fitted with balanced vertical secondary sliders — full listed-building consent secured in six weeks.
Ecclesall Road bay-window sound retrofit
Three-panel horizontal sliders across a 3.2 m Edwardian bay — Rw measured at 47 dB post-install.
Local reference points
- Era
- any
- Typical window
- protected historic joinery
- Top problem
- no permitted route to modern glazing performance
- Recommended service
- Heritage & Listed
- Recommended product
- vision range
- Performance
- fully reversible install — no alteration to historic fabric
Listed-building consent help — free with every quote
We draft the drawings and specifications your conservation officer needs.
Common questions
Is listed-building consent needed?
In many cases no, because no historic fabric is altered. Where it is needed we supply drawings and specifications with your quote at no cost.
Will the install harm the original sashes?
No — the secondary system fits into the reveal, not into the sash box. The original window operates exactly as before.
Do you match the frame colour to my existing joinery?
Yes — powder-coated aluminium is available in white, black, grey, satin anodised or any of 200+ RAL colours, colour-matched on request.
How does this compare to replacement double glazing?
A modern secondary unit with Low-E glass and a 100 mm cavity outperforms most existing sealed double-glazed units — and it works on windows you legally can't replace.
What if I've got Article 4 restrictions?
Article 4 applies to changes visible from the highway — a room-side install isn't visible from outside so it's usually unaffected.
Next step for listed buildings owners
Send us photos of one or two windows and we'll come back with a written quote and a spec sheet you can compare against replacement double glazing.