Mexborough · S64
Arched window glazing in Mexborough, Doncaster
If your Mexborough property has semi-circular, segmental or pointed heads, sometimes with tracery in the arch, this page is the specification we would quote. The local brief in S64 is usually rail and road noise on tightly-packed terraced streets, and the whole opening including the arch is sealed rather than leaving the decorative head as an open loss path. Mexborough is not a conservation area, so the decision is purely technical rather than a consent question. Most enquiries here come from owner-occupiers doing one or two rooms at a time, so we price per opening rather than per house. Mexborough is about 8 miles from central Doncaster, so a survey here is a short run for our team off the M18 J3 / A1(M) J36.
The technical answer
| Window type | semi-circular, segmental or pointed heads, sometimes with tracery in the arch (Victorian villas, chapels, schools and converted ecclesiastical buildings) |
|---|---|
| Underlying problem | the curved head has to be templated physically — a measurement cannot describe it |
| System we fit | curved-head units with the arch shaped to the opening, straight panels below |
| Glass specification | clear or Low-E in the arch so tracery stays legible, heavier glass in the working panels below |
| Measurement | a physical template is taken of the arch — this is the one situation where we will not work from dimensions alone |
| Heritage position | in converted chapels and schools the arch is invariably the reason the building is protected, so it stays untouched |
One survey, one fitting team, no subcontracted installers.
Installs are room-side only, so scaffolding is never needed and the exterior is untouched.
We survey with a sound level meter where noise is the driver, so the target is a number rather than an impression.
Measured performance figures come from our own post-install testing, not manufacturer maximums.
Local detail that changes the job
An arched head cannot be described by width and height, so we take a physical template — a survey without one is guesswork.
Leaving the arch untreated and glazing only the rectangle below leaves a substantial open loss path at the top of the warmest air in the room.
Mexborough stock is Victorian industrial terraces and the prevailing glazing is one-over-one sashes, which is why arched window glazing comes up here so often.
A physical template is taken of the arch — this is the one situation where we will not work from dimensions alone.
Mexborough carries no conservation designation, so the specification is decided on performance alone.
From enquiry to install
- Step 1
Send a photo of the window — with semi-circular we can usually tell you the likely system before we visit.
- Step 2
Survey in Mexborough: a physical template is taken of the arch — this is the one situation where we will not work from dimensions alone.
- Step 3
Manufacture to the templated sizes with your chosen finish.
- Step 4
Room-side install with no external access and no alteration to the original frame.
Recent installs nearby
Bennetthorpe villa Low-E retrofit
Full ground-floor sash retrofit with Low-E secondary sliders — gas usage down 22% over the following heating season.
Lakeside new-build train-line retrofit
East Coast Main Line rumble reduced by 12 dB with 6.8 mm laminated sliders behind modern PVCu.
Nether Edge Grade II sash retrofit
Six original box sashes fitted with balanced vertical secondary sliders — full listed-building consent secured in six weeks.
Other window types in Mexborough
Local reference points
- Area
- Mexborough (S64)
- Town
- Doncaster, South Yorkshire
- Housing era
- Victorian industrial terraces
- Typical windows
- one-over-one sashes
- Landmark
- Mexborough station
- Conservation area
- No
- Window style
- Arched & Gothic Windows
- Period
- Victorian villas, chapels, schools and converted ecclesiastical buildings
Arched window glazing in Mexborough — the short version
The curved head has to be templated physically — a measurement cannot describe it. We fit curved-head units with the arch shaped to the opening, straight panels below with clear or Low-E in the arch so tracery stays legible, heavier glass in the working panels below, templated to your opening. The whole opening including the arch is sealed rather than leaving the decorative head as an open loss path.
Common questions
Can secondary glazing follow an arched head?
Yes. The head is shaped from a physical template of the opening, and the panels below are conventional.
Is it much more expensive than a rectangular window?
The shaped head carries a premium because it is a bespoke component, but the panels below are standard, so the whole-window difference is smaller than people expect.
Will the tracery still be visible?
Yes — clear glass in the arch keeps it legible from inside the room.
Can we do one room now and the rest later?
Yes. We template and price per opening, so a later phase is quoted at the same rate — there is no penalty for splitting the work.
Will it get in the way of curtains or blinds?
Rarely. Reveal-fixed units sit inside the existing recess; where the recess is shallow we face-fix and reposition the blind, which we flag at survey rather than on the day.
Start with one room
Send the opening sizes for the worst room and we will price that first — extending later costs no more. Send a photo of the arched window glazing — with semi-circular in a victorian industrial terraces Mexborough property we can usually spec it before we visit.